home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
newsgroups
/
misc.19950726-19950929
/
000363_news@columbia.edu_Fri Sep 15 13:09:12 1995.msg
< prev
next >
Wrap
Internet Message Format
|
2020-01-01
|
2KB
Received: from apakabar.cc.columbia.edu by watsun.cc.columbia.edu with SMTP id AA29352
(5.65c+CU/IDA-1.4.4/HLK for <kermit.misc@watsun.cc.columbia.edu>); Fri, 15 Sep 1995 09:09:19 -0400
Received: by apakabar.cc.columbia.edu id AA16585
(5.65c+CU/IDA-1.4.4/HLK for kermit.misc@watsun); Fri, 15 Sep 1995 09:09:16 -0400
Path: news.columbia.edu!manila.cc.columbia.edu!ylee
From: ylee@columbia.edu (Yeechang Lee)
Newsgroups: comp.protocols.kermit.misc,comp.protocols.tcp-ip.ibmpc
Subject: Problems with MS-Kermit 3.14 and (c)slipper.exe?
Date: 15 Sep 1995 13:09:12 GMT
Organization: Council of Foreign Relations, Covert World Domination Bureau
Lines: 32
Message-Id: <43btto$g66@apakabar.cc.columbia.edu>
Nntp-Posting-Host: manila.cc.columbia.edu
X-Disclaimer: I sure as heck don't speak for Columbia or AcIS.
Xref: news.columbia.edu comp.protocols.kermit.misc:3629 comp.protocols.tcp-ip.ibmpc:37064
Apparently-To: kermit.misc@watsun.cc.columbia.edu
I use Kermit 3.14 (24 May 1995 release, patchlevel 9) and slip8250.com
(10 Feb 1992, the one that comes with the Kermit .ZIP distribution)
quite successfully on my 386sx/16 to dial up to Columbia and run
multiple terminal sessions with SLIP. However, running Kermit with
either slipper.exe or cslipper.exe (15 Jan 1994, part of slippr15.zip
file available everywhere--their documentation describe them as
drop-in replacements for slip8250.com) is not so successful--about
half my keystrokes get "bunched up" for several seconds at a time,
then get all spit out to the host at once. Output to me seems
unaffected.
The funny thing is the trouble didn't exist with the 18 January Kermit
release; I used cslipper.exe and Kermit on an old 8-MHz Tandy clone
quite successfully. Upgrading to 24 May caused similar symptons on
that machine (verified by returning to the older kermit.exe
executable). Now same things happen on this 386sx/16. Any ideas?
Here are the parameters I use to load slip8250.com:
c:\kermit\networks\slip8250 0x60 -h slip 3 0x2f8 38400
And slipper.exe and cslipper.exe:
c:\kermit\networks\slipper.exe com2 baud=38400 keepalive
I have tried loading slipper.exe and cslipper.exe in regular memory,
in upper memory, and with and without the keepalive switch, all with
no effect.
(Crossposted to comp.protocols.kermit.misc and comp.protocols.tcp-ip.ibmpc)
--
http://www.columbia.edu/~ylee/